11. Flip the roll cage/seat so it sits upright.
12. Using the 1/4-inch Allen wrench, remove the Allen head bolt to take apart both shaft collars on the roll cage. You are now ready to place the roll cage in the bed of the Commander. The roll cage uses two-inch piping to match the stock roll cage on the Commander. On the other vehicles, the stock piping is close to 1 5/8-inch. UTV Mountain Accessories' uses 1 5/8-inch piping for all other UTVs it has kits for. The company also matches the stock powdercoating on the vehicles on each of its roll cage kits.
13. Lift the entire roll cage/seat into the bed of the vehicle. This will be easier if you have someone to help you place the roll cage.
14. Attach the shaft collars to the existing vehicle's roll cage. Tighten the shaft collars with the 1/4-inch Allen wrench.
www.utvmountainaccessories.com
