7. Make sure the belt strap hugs the seat before you bolt it down. The lap belt is on the left and the harness on the right.
8. Bolt the seat belts to the roll cage using the bolt, spacer, lock washer and nut.
9. First put the bolt through the seat belt tab and through the frame, then place the spacer, lock washer and nut. There will be four bolts if you're installing a harness seat belt or two for the lap belt.
10. Using an 11/16-inch open end wrench on the inside and the 9/16-inch ratchet on the outside, tighten the nuts and bolts.
www.utvmountainaccessories.com
