Spare Parts

Published in the September 2013 Issue September 2013

Max Ground Clearance Lower Front A-arms

Zbroz Racing’s ARS-FX max ground clearance lower front A-arms offer more clearance and strength for the Polaris XP 900. These are exactly what you need for either racing or serious trail pounding.

This kit includes both right and left replacement lower A-arms and CV boot guards. Powdercoated to your choice of color or left raw at your request, these arms are easily installed in your driveway or garage and retail for $329.

Available colors: gloss black, Voodoo Blue, RZR red, Orange Madness, gloss white and uncoated.

Contact ZBroz Racing (435) 753-7774 or

Wildcat 1000i HO Supercharger Kit

Speedwerx has released its new supercharger kit for all Arctic Cat Wildcat 1000i HO models (Wildcat, Wildcat X and Wildcat 4). Speedwerx promises riders unmatched power and acceleration. Recent testing at the company’s headquarters in Minnesota has shown 130-140 hp on regular pump gas, with race gas providing even more horses, and top speeds of more than 90 mph.

These kits come as a complete kit with everything you need to perform the installation. There are also a few electronics upgrades available if riders wish to purchase them.

The kit retails for $6,500.

Contact Speedwerx (651) 982-6020 or

QuadBoss Winches

QuadBoss recently introduced its new line of heavy-duty winches. QuadBoss winches come with options of 2,500-lb. or 3,500-lb. pull strengths and Dyneema rope or wire cable. All winches are sealed and water-resistant.

Winches feature a two-stage planetary gear system for fast line speed and use a low electric current. Made with aluminum engagement levers and automatic load holding self-locking brakes, QuadBoss winches are built to be strong and dependable.

2,500-lb. winches come with handlebar-mounted switches and a 3.0-horsepower heavy-duty electric permanent magnetic motor, while the 3,500-lb. winch comes with a corded remote and 3.5-horsepower heavy-duty electric permanent magnetic motor. QuadBoss winches with Dyneema rope feature a Hawse fairlead and a roller fairlead is included in the wire cable versions. All winches come with a one-year manufacturer’s warranty.

Contact QuadBoss (877) 847-1558 or

Sun F A-033 12-Ply Tire

Available in a variety of sizes, this ultra durable 12-ply tire from GPS Offroad Products is the perfect option for riders looking to eliminate or at least minimize as much as possible flat tires.

Originally developed for use by the U.S. military, the model A-033 12-ply was designed to handle the harshest conditions without failure. Featuring an aggressive non-directional tread pattern with a tread depth of more than three-fourths of an inch, the A-033 provides superior traction on every type of terrain. The footprint is a proven and popular utility tread pattern and the tread covers the entire shoulder of the tire for added sidewall protection.

A higher concentration of natural rubber is infused into the bias constructed carcass, creating an incredibly durable tire that is soft enough to grip hard surfaces while still offering exceptional tread life.

In addition to being virtually puncture proof, the A-033 features an ultra stiff sidewall with almost no flex. Incorporating elements of run flat technology in the design, the tire will actually maintain its rigidity without any air in it. That means in the rare event that you puncture one, you won’t have to worry about being stranded.

Despite doubling the ply rating of most utility tires on the market, the average weight increase is just 27 percent over the six-ply version of the same tire.

The twelve-ply A-033 is available in 25-, 26- and 27-inch sizes and can be purchased online.

Contact GPS Offroad Products 702-643-8473 or

AUT Short Side Kit

This new accessory is made for Triton’s AUT1282 (single axle), AUT1482 and AUT1682 trailer models.

The AUT short side kit has two aluminum sides that work hand-in-hand with the No. 16060 AUT stoneguard ramp kit. One side of the AUT short side kit has three full-length aluminum planks while the other side has two sections of planks (front and rear section). The side with two sections of planks allows you to lift the front section out to side load an ATV using the ramps from the No. 16060 kit

When installing this kit, owners can choose which side of the trailer to have the two sections of planks side mounted on: either the driver or passenger side. Once installed, this kit allows for loading and unloading only from the side with the two sectioned planks. The ramps from the AUT stoneguard ramp kit make for an easy low ramp angle and adjust to the wheel width of your ATV.

This new AUT Short Side Kit is a great accessory to help keep items contained on the deck but still allow riders to side load ATVs using Triton’s No. 16060 kit.

Contact Triton Trailers (262) 670-6514 or

M3 PLUS Track System

Mattracks, the innovator of 4x4 rubber track conversion systems, introduces the M3 PLUS system for side-by-side UTVs.

With 20 years of 4x4 pickup, tractor and ATV/UTV rubber track system design and development, engineering and manufacturing experience, the new M3 PLUS system enables UTVs to go where wheeled vehicles cannot.

The M3 PLUS system provides greater performance in deep snow but can be used year-round. With minimal power loss, UTVs can still maintain maximum performance capabilities in any operating conditions.

With an approximate 51- by 13-inch footprint, which is 12 inches longer than the standard track, the rear track on the M3 PLUS provides incredible flotation in deep snow, sand, mud, swamps or any challenging terrain. Its self-cleaning system allows debris to be ejected from the inside of the track so riders need not lose any riding time. With the M3 aggressive lug pattern and built-in suspension the traction is outstanding and provides a 25 percent larger footprint than the standard M3.

Contact Mattracks (877) 436-7800 or

ProLink Shackle Mount

Engineered and machined in the USA from lightweight billet 6061 aluminum, the ProLink shackle mount from Factor 55 provides a safe means to easily attach a standard 3/4-inch screw pin shackle to existing winch cable and rope eyes.

The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8-inch double shear pin. The front of the ProLink provides the precision shackle mounting hole and a massive 1.2-inch-thick mounting tab. The ProLink is compatible with both Hawse and Roller fairleads and fits neatly on both versions. 

Contact Factor 55 (208) 639-1674 or

Goldfinger Left-Side Throttle

The Goldfinger left-side throttle by Full Throttle is designed to reduce thumb fatigue and provide safer sidehilling in steep off-trail situations. The gold-anodized throttle lever can be operated with one finger and a safety pin can be used to lock the throttle, preventing unwanted use.

The kit’s cable, adapter and fasteners are constructed of the highest quality stainless steel and a rubber accordion boot keeps mud and dirt out of the cable. The Goldfinger installation kit includes all necessary hardware, Allen wrenches and instructions for easy installation.

Available for most ATV makes and models, the Goldfinger left-side throttle retails for $109.95.

Contact Full Throttle (509) 927-7533 or

Namura Pistons

Namura Technologies has released three new pistons for Polaris vehicles. The NA-50070, NA-50080 and NA-50081 pistons are now in stock and fitted for model years 2005-13 Polaris Sportsman 800, 2005-09 Ranger 700 and 2008-13 RZR.

These new pistons come with all the features customers have come to expect from a Namura piston: MOS2-coated skirts, a machined smooth head and an anodized dome. They are available at most Polaris dealers.

Contact Namura Technologies

SnoCobra Ski & Track System

The SnoCobra ski and track system from Every Season Products allows you to ride your dirt toy 365 days a year. Every Season Products developed this product to give ATV and UTV users the best of both worlds as an affordable option for sportsmen, ranchers and resort owners who want to get more out of their existing machines.

The SnoCobra system comes in several color options to match almost any machine and its patented strap and clamp mechanism is easy to use.

The SnoCobra’s skis are made of reinforced fiberglass composite with a gel-coated exterior and have two four-inch carbides and two 18-inch wear bars on each ski. The skis fit both ATVs and side-by-sides. Three models are available: the SC100 (black ski and handle, steel saddle and hardware), SC300 (any handle/ski color combination, aluminum saddle, stainless hardware), and SCX500 (printed camo or carbon fiber, aluminum saddle, stainless hardware).

Contact SnoCobra (866) 377-0045 or

  • Like what you read?

    Want to know when we have important news, updates or interviews?

  • Join our newsletter today!

    Sign Up
You Might Also Be Interested In...

Send to your friends!

Already a subscriber? Please check your email for the latest full issue link.